MotoVerde MX Bike Wash Cleaner 5L
Out of stock
HIGH PERFORMANCE BIKE CLEANER.
This product is concentrated, making 10 x 1L, meaning you are getting twice for your money! As it is a refill, no empty bottle or trigger is included, but can be purchased separately.
MotoVerde MX Bike Wash is 100% salt-free, with no corrosive components in the product making it the safest cleaner on the market!
Fully biodegradable with recyclable packaging.
Safe for use on all E-Bikes.
Completely safe to use on all surfaces including paints, plastics, anodised parts, sensitive metals (including aluminium) and carbon fibre.
Tough on dirt but gentle to your bike. Our Bike Wash will remove mud, dirt and grime with ease, whilst also removing sand and clay stains. It can also be used on your kit, boots and helmets!
High-foaming product that clings to your bike and does the work for you!
Contains UV protection to protect your paint colours from fading in sunlight.
Instructions For Use
Use previously purchased 1L Bike Wash bottle and dilute product 50/50 with water.
Rinse excess dirt off bike.
Apply MotoVerde Bike Wash, leaving to soak for 15-20 minutes (5 minutes if in a rush). The longer soak time, the better the results as it is non-aggressive!
Agitate with a brush or sponge if required for stubborn dirt.
For best results use MotoVerde MX After-Shine following.
For kits: add at least 250ml of concentrated product into a bucket of warm water and submerge your kit inside.
You can also throw in your goggles and straps before leaving to soak overnight.
The following morning, remove your goggles and straps and rinse under a tap until all chemical excess has been removed then leave to air dry.
With trousers, place these on the floor and agitate the bottom area with a sweeping brush to loosen excess dirt before placing directly into your washing machine, alongside kit top.
Wash your kit at 30 degrees on a normal wash or sports wash.
At the end of the wash cycle your kit will be the cleanest you have seen it since the day you purchased it!
For boots and helmets: simply spray product (once diluted) all over and leave to soak for 15 minutes before agitating with a brush/sponge if required. Rinse off!